Product Sections
|  Welcome to AMADEAL LTD.We here at Amadeal Ltd. aim to bring quality yet affordable machines & machine tools. We are proud to say that Amadeal Ltd. is one of the top rated brands when it comes to metalworking and forming machines well suited for either professional workshop or hobbyist alike. See our vast range of mini-lathes, bench lathes, milling, grinding and boring machines, both manual and CNC on our catalog list. Be it for professional or hobby purposes, the quality and affordability of our machines really are a great value and aim to please everyone.
All machines we sell are fully guaranteed, and we aim to give product support that is second to none. All our products are sourced from the Far East, and are made to order by the same manufacturers that make for the leading UK and US suppliers.
You can 'phone in your queries or orders through our hotline: (+44) 0208 558 4615 (Between 8am-8pm), (+44) 0208 558 9055 (Between 11-4pm) or 07887 945717
All our products are available to be viewed at: Unit 20 The Sidings Hainault Road Leytonstone, London E11 1HD
Monday - Friday (8am-4pm) or at other times by calling for prior arrangement.
We stock all kinds of spare parts for all of the machines that we carry. If you require parts and is not listed on this website, drop us a line between the hours of 11-4pm Mon-Fri or email us and we might be able to help you. | Special OfferWe are continuously updating our website. You will see in this section special offers from our wide range of products.
|
New Products4" Spindle Upgrade Real Bull Mini-lathe (CJ18 series) £36.25 Spindle upgrade for the 7x14 Real Bull mini-lathe (CJ18A series) to 4" spindle plate
This item is the spindle with integral 4"/100mm spindle plate
For modifications to the Real Bull mini lathe a useful site is:
www.toolsandmods.com
where this modification is to be documented. find out more | | Quick Change Tool Post for the 9x20 Bench Lathe £36.00 Quick Change Tool Post for the 9x20 Bench Lathe - with 3 tool holders in the set.
This really is a 'must-have' accessory as it avoids having to shim up tooling in the toolpost. It will take up to 12mm shank cutting tools and the holder will allow you to position the cutting tip accurately and rapidly. And, of course, essential for keeping set tool heights for repeat operations.
Block is 55 x 55mm (plus dovetails) Height - 40mm Bore - 10mm 3 holders Gross weight 17.5kg Extra holders - £8 each
Please note that not all the parts are showing in the picture - these are all complete sets with all bits needed for each holder. find out more | | 7 HSS Straight Shank Machine Chucking Reamers £29.00 Boxed set of 7 HSS straight shank Machine Reamers (chucking reamers) - sizes: 3 - 4 - 5 - 6 - 8 - 10 - 12 mm
DIN212 find out more | | 4 piece Single flute End Mill Set TiN Coated - Metric £14.00 6 x single flute end mills in a boxed set. These are HSS with Titanium coating in the following sizes:
3 x 12 x 60mm, 4 x 12 x 60mm, 6 x 14 x 60mm, 8 x 14 x 80mm. find out more | | 21pc HSS Interchangeable Pilot Counterbore Set £46.00 A superb boxed set of 21 HSS Interchangeable Pilot Counterbores
Sizes:
Counterbores: 8.5 - 9.5 - 10.5 - 11.5 - 13.5 - 16.5mm
Pilots: 4-4,5-5-5,5-6-6,5-7-7,5-8-8,5-9-9,5-10-10.5mm find out more | | | |
 | Best Sellers CJ18 - 100mm/3jaw  £360.00 With 4inch Spindle Plate as standard with 4inch (100mm) 3-jaw self-centering Chuck. Utilising full use of the 20mm Spindle bore which is restricted on a 3" chuck machine.
***** 350mm Between Centres.***** 550W Motor ****Digital Readout of the spindle speed AND tailstock lever lock****
Brand new stock. Ideal for the professional engineer or model maker alike - this is a superb lathe at a bargain price!
With this lathe you will get a superb workhorse, a guarantee, and a full after sales service.
Specifications: Power 550W Distance between centres : 350mm Swing Over Bed: 180mm Swing Over Cross Slide: 110mm Taper: MT3 Tailstock Taper: MT2 Spindle Speed: 50 - 2500rpm Spindle Bore: 20mm Cross slide Travel: 65mm Chuck diameter 100mm (Integral spindle plate is 100mm no adapter plate required) Range of Metric Threads: 0.5 - 2.5mm. Range of Imperial Threads: 12 - 52 TPI. Spindle Accuracy: 0.01mm. Size with packaging is L: 81cm W: 32cm H: 31cm Operating instructions enclosed. American circuit board 230v 50Hz motor Actual dimensions of lathe - 29in.x 10in.x 9½ in. Net weight/Gross weight : 45/48Kg
The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.
*Please note that the images and specifications stated are for reference use only. Actual products may vary. find out more  AMA280VF Bench Lathe (11x27) Var.spd - power crossfeed  Var.spd - power crossfeed.jpg) £1,230.00 FEATURES: Most useful, heavy duty homeshop lathe. V-way bed is hardened and precision ground. Super width bedway gives greater capacity. Spindle is supported by precision tapered roller bearing. Automatic feed and threading are fully interlocked. T-slotted cross slide. Adjustable gibs for slideways. Top design of gearbox for improved function. Cuts right and left hand threads. Tailstock may be offset for turning tapers. A reversing switch is included for added versatility. Equipped with high quality belt and control board. Tolerance test certificate, test flow chart included. With powered cross feed
SPECIFICATION: Model No. Distance between centers 700mm Swing over bed 280mm Swing over cross slide 165mm Taper of spindle bore MT4 Spindle bore 26mm Number of spindle speeds Variable Range of spindle speeds 50~2000rpm Range of cross feeds 0.02~0.28mm/r Range of longitudinal feeds 0.07-0.20mm/r Range of inch threads 8-56T.P.I Range of metric threads 0.2-3.5mm Top Slide travel 50mm Cross slide travel 140mm Tailstock quill travel 80mm Taper of tailstock quill MT2 Motor 0.75/1.1KW Packing size 1400 x 700 x 680mm Net weight 210kgs
STANDARD ACCESSORIES: Splash guard 1pc Chip tray 1pc Toolbox&tools 1set Speed counter
OPTIONAL ACCESSORIES: Four-jaw chuck 1set Backplate 1pc Follow rest 1pc Steady rest 1pc Face plate 1pc ER25 Collet chuck 1set Collet holder 1set Turning tools 1set Quick change tool post 1set Stand
The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.
*Please note that the images and specifications stated are for reference use only. Actual products may vary. find out more  2 Flexible Coolant Hoses with Magnetic Base £16.00 2 x 350mm adjustable coolant hoses Brass taps Switchable magnetic base with 110lb pull Brass inlet connector find out more Tilting Swivel Table 7"x10" for Milling or Drilling £79.00 Perfect for setting work at any angle for milling, grinding or drilling Heavy, rugged, graded casting Machined 1/2" 'T' slots Graduated 90 degrees for setting 45 degree either side of vertical Accuracy of table surface - 0.0005" find out more Tilt and Swivel Milling Vice 75mm jaws £70.00 This item is an excellent tilt and swivel vice. It is well made with jaws closing nicely in parallel - ideal for milling or drilling and at a bargain price!
Jaw width - 75mm Opening - 75mm Overall height - 120mm Overall width - 140mm Bolt slot centres - 180mm Net weight - 9.17Kg Gross weight - 9.72Kg Swivel - 360° Tilt - 90° find out more
New Products:
- 4" Spindle Upgrade Real Bull Mini-lathe (CJ18 series)
- Quick Change Tool Post for the 9x20 Bench Lathe
- 7 HSS Straight Shank Machine Chucking Reamers
- 4 piece Single flute End Mill Set TiN Coated - Metric
- 21pc HSS Interchangeable Pilot Counterbore Set
|