Bench Lathe

Excellent quality - Terrific price! Now with tailstock lever lock and thread dial gauge as standard.

FEATURES:
Most popular,widely useful hobby lathe.
V-way bed is hardened and precision ground.
Spindle is supported by precision tapered roller bearing.
High precision chuck.
Power longitudinal feed allows threading.
Adjustable gibs for slideways.
Right and left hand threads cutting is available.
Tailstock may be offset for turning tapers.
Easy to change speed by gears.
Tolerance test certificate, test flow chart included.

SPECIFICATION:
Distance between centers: 400mm
Swing over bed: 210mm
Swing over cross slide: 110mm
Width of bed: 100mm
Taper of spindle bore: MT3
Spindle bore: 21mm
Number of spindle speeds: Variable speed
Range of spindle speeds: 50~2500rpm
Range of longitudinal feeds: 0.10-0.20mm/r
Range of inch threads: 8-44T.P.I.
Range of metric threads: 0.5-3mm
Top Slide travel: 55mm
Cross slide travel: 75mm
Tailstock quill travel: 60mm
Taper of tailstock quill: MT2
Motor: 600W
Packing size: 840 x 390 x 470mm
Net weight: 75kg

STANDARD ACCESSORIES
Splash guard 1pc
Chip tray 1pc
Toolbox&tools 1set
Speed counter 1set

*Please note that the images and specifications stated are for reference use only. Actual products may vary.

FEATURES:
Most useful, heavy duty homeshop lathe.
V-way bed is hardened and precision ground.
Super width bedway gives greater capacity.
Spindle is supported by precision tapered roller bearing.
Automatic feed and threading are fully interlocked.
T-slotted cross slide.
Adjustable gibs for slideways.
Top design of gearbox for improved function.
Cuts right and left hand threads.
Tailstock may be offset for turning tapers.
A reversing switch is included for added versatility.
Equipped with high quality belt and control board.
Tolerance test certificate, test flow chart included.
With powered cross feed

SPECIFICATION:
Model No.
Distance between centers 700mm
Swing over bed 280mm
Swing over cross slide 165mm
Taper of spindle bore MT4
Spindle bore 26mm
Number of spindle speeds Variable
Range of spindle speeds 50~2000rpm
Range of cross feeds 0.02~0.28mm/r
Range of longitudinal feeds 0.07-0.20mm/r
Range of inch threads 8-56T.P.I
Range of metric threads 0.2-3.5mm
Top Slide travel 50mm
Cross slide travel 140mm
Tailstock quill travel 80mm
Taper of tailstock quill MT2
Motor 0.75/1.1KW
Packing size 1400 x 700 x 680mm
Net weight 210kgs

STANDARD ACCESSORIES:
Splash guard 1pc
Chip tray 1pc
Toolbox&tools 1set
Speed counter

OPTIONAL ACCESSORIES:
Four-jaw chuck
Backplate
Follow rest
Steady rest
Face plate
ER25 Collet chuck
Collet holder
Turning tools
Quick change tool post
Stand

The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.

*Please note that the images and specifications stated are for reference use only. Actual products may vary.
More pics...

FEATURES:
Most useful, heavy duty homeshop lathe.
V-way bed is hardened and precision ground.
Super width bedway gives greater capacity.
Spindle is supported by precision tapered roller bearing.
Automatic feed and threading are fully interlocked.
T-slotted cross slide.
Adjustable gibs for slideways.
Top design of gearbox for improved function.
Cuts right and left hand threads.
Tailstock may be offset for turning tapers.
A reversing switch is included for added versatility.
Equipped with high quality belt and control board.
Tolerance test certificate, test flow chart included.
With powered cross feed

SPECIFICATION:
Model No.
Distance between centers 700mm
Swing over bed 280mm
Swing over cross slide 165mm
Taper of spindle bore MT4
Spindle bore 26mm
Number of spindle speeds Variable
Range of spindle speeds 50~2000rpm
Range of cross feeds 0.02~0.28mm/r
Range of longitudinal feeds 0.07-0.20mm/r
Range of inch threads 8-56T.P.I
Range of metric threads 0.2-3.5mm
Top Slide travel 50mm
Cross slide travel 140mm
Tailstock quill travel 80mm
Taper of tailstock quill MT2
Motor 0.75/1.1KW
Packing size 1400 x 700 x 680mm
Net weight 210kgs

STANDARD ACCESSORIES:
Splash guard 1pc
Chip tray 1pc
Toolbox&tools 1set
Speed counter

OPTIONAL ACCESSORIES:
Four-jaw chuck
Backplate
Follow rest
Steady rest
Face plate
ER25 Collet chuck
Collet holder
Turning tools
Quick change tool post
Stand

The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.

*Please note that the images and specifications stated are for reference use only. Actual products may vary.
More pics...

The AMA290VF bench lathe

'phone now for more info or to reserve one on 0208 558 4615 (10-5pm) or email us at info@amadeal.co.uk

With 38mm spindle bore & 6"/150mm chuck

Also available with 2-axis DRO system at £2185 - call or email for details.

Now with Thread Dial Indicator, Tailstock Lever Lock & Leadscrew Cover FITTED AS STANDARD!! And with Power Cross Feed too.

(some cheaper models have a single leadscrew and thus limited functionality)

The AMA290VF from Amadeal London UK.- Excellent quality - Terrific price! Now available

The price has been held down as much as possible and these will sell fast - so don't miss out.

Call to arrange a viewing on most days including saturdays.

Fully guaranteed and a full range of spares available.

<

FEATURES:
Most useful,heavy duty homeshop lathe. V-way bed is hardened and precision ground. Super width bedway gives greater capacity. Spindle is supported by precision tapered roller bearing. Automatic feed and threading are fully interlocked. T-slotted cross slide. Adjustable gibs for slideways. Top design of gearbox for improved function.  Cuts right and left hand threads. Tailstock may be offset for turning tapers. A reversing switch is included for added versatility. Equipped with high quality belt and control board. Tolerance test certificate, test flow chart included. With powered cross feed
SPECIFICATION:
Model No.   Distance between centers 700mm Swing over bed 280mm Swing over cross slide 165mm Taper of spindle bore MT5 Spindle bore 38mm Number of spindle speeds Variable Range of spindle speeds 50~2000rpm Range of cross feeds 0.02~0.28mm/r Range of longitudinal feeds 0.07-0.40mm/r Range of inch threads 8-56T.P.I Range of metric threads 0.2-3.5mm Top Slide travel 50mm Cross slide travel 140mm Tailstock quill travel 80mm Taper of tailstock quill MT3 Motor 1.1KW Packing size 1400 x 700 x 680mm Net weight 230kgs > The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information. *Please note that the images and specifications stated are for reference use only. Actual products may vary. More pics...
AMA290VF Bench Lathe (11x27) Var.spd - power crossfeed - 38mm bore - w/ 2-axis DRO System Price: £2,135.00 (Including VAT at 20%) Quick Change Tool Post - £220 Face Plate - £22 Fixed Steady - £25 Travelling Steady - £24 160mm 4-Jaw Independent Chuck - £99 Backplate for Chuck - £20 The AMA290VF bench lathe 'phone now for more info or to reserve one on 0208 558 4615 (10-5pm) or email us at info@amadeal.co.uk With 38mm spindle bore & 6"/150mm chuck Also available with 2-axis DRO system at £2185 - call or email for details. Now with Thread Dial Indicator, Tailstock Lever Lock & Leadscrew Cover FITTED AS STANDARD!! And with Power Cross Feed too. (some cheaper models have a single leadscrew and thus limited functionality) The AMA290VF from Amadeal London UK.- Excellent quality - Terrific price! Now available The price has been held down as much as possible and these will sell fast - so don't miss out. Call to arrange a viewing on most days including saturdays. Fully guaranteed and a full range of spares available. < FEATURES: Most useful,heavy duty homeshop lathe. V-way bed is hardened and precision ground. Super width bedway gives greater capacity. Spindle is supported by precision tapered roller bearing. Automatic feed and threading are fully interlocked. T-slotted cross slide. Adjustable gibs for slideways. Top design of gearbox for improved function.  Cuts right and left hand threads. Tailstock may be offset for turning tapers. A reversing switch is included for added versatility. Equipped with high quality belt and control board. Tolerance test certificate, test flow chart included. With powered cross feed SPECIFICATION: Model No.   Distance between centers 700mm Swing over bed 280mm Swing over cross slide 165mm Taper of spindle bore MT5 Spindle bore 38mm Number of spindle speeds Variable Range of spindle speeds 50~2000rpm Range of cross feeds 0.02~0.28mm/r Range of longitudinal feeds 0.07-0.40mm/r Range of inch threads 8-56T.P.I Range of metric threads 0.2-3.5mm Top Slide travel 50mm Cross slide travel 140mm Tailstock quill travel 80mm Taper of tailstock quill MT3 Motor 1.1KW Packing size 1400 x 700 x 680mm Net weight 230kgs > The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information. *Please note that the images and specifications stated are for reference use only. Actual products may vary. More pics... Online Catalogue | Lathes |  Bench Lathe   © 2011 Amadeal Ltd.  Contact Us | Privacy Policy | Terms & Conds	Delivery Costs: Our delivery charges are based on the combined weight of the order and the delivery location. If you would like to see a total as you add items please complete your address details after adding the first item. Charges start from £1.50 up to £45 for a 45 kg parcel delivered to UK mainland addresses (Except for NI, Islands and some Scottish Postcodes) via our Next Day service. Best Sellers: AMA16VF - with Fine Feed and DRO AMA-18 Air Compressor + AMA-280K (w/ two Airbrush Kits) + 2 Hoses New Products Basic Live Centre - MT2