Gears

This is one of the threading change gears. It is also used in the lead screw drive train of the mini lathe.

- 45 Teeth
- Module 1 Metric gear
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm

Mini lathe lead screw drive gear.

- 80 teeth
- Module 1 Metric gear
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm

- Module 1 Metric gears
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm

Complete set of change gears for the mini lathe. Includes the following:

1 x 30 Tooth gear
1 x 35 Tooth gear
2 x 40 Tooth gear
1 x 45 Tooth gear
2 x 50 Tooth gear
2 x 60 Tooth gear

*Please use picture as reference. Kindly refer to the description above for a more accurate description/specification.

Transmission gear, 2-speed spindle.
This gear goes on the spindle of the mini lathe and mini mill.

This is the larger of the two transmission gears. It has 21 Teeth on one end and 29 teeth on the other.

Transmission gear, 2-speed spindle.
This gear goes on the spindle of the mini lathe and mini mill.

This is the smaller of the two transmission gears. It has 12 Teeth on one end and 20 teeth on the other.