Includes the 4th-axis (Not shown in photo)
Syil Conversion of a popular sized mill
Retains hand wheels on each axis for use in manual mode.
The X, Y, and Z axis's are all updated with ball screws, including two screw nuts, plane bearing and couplers, providing very high localization accuracy.
The Z axis stepper motor has a direct link to the Z ball screw with a coupler. This installation has better accuracy than other conversion plans.
All stepper mounts and balls screw mounts are constructed from steel .
The X and Y axis steppers are fitted with a protective shell to protect against cutting debris. The Z axis stepper is protected by its installation in the top of the machine.
Movement subdivisions up to 100 provide performance close to servo based systems.
Full computer control through a parallel interface with a pc
SPECIFICATIONS:
X Travel: 280mm 11.02
Y Travel: 160mm 6.3
Z Travel: 170mm 6.69
Table Size
- X: 500mm 19.7
- Y: 160mm 6.3
Drilling Capacity: 25mm 0.985
Milling Capacity: 16mm 0.63
Min Spindle Speed: 100
Max Spindle: Speed 3000
Weight: 70kg 154(lbs)
Spindle Type: MT2
Motor Size: 1kw 1.3hp
CNC Spindle: No
Manual Controls: Yes
Computer Included: No
Accuracy: 0.0005"
Repeatability: 0.0004"
Rapid Traverse Speeds: 1500 mm/min 60 ipm
Screw type: Ball Screw
The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.
*Please note that the images and specifications stated may only be used as a guide. Actual products may vary.
More...
