The U2 is built with a sturdy base cabinet into which we've assembled controller electronics, leaving ample room for an optional flood cooling system or tool storage.
Have you ever wanted a CNC surface grinder? Now you don’t need a separate machine.
Change from horizontal, vertical, or surfacing configurations quickly and with ease.
X, Y, Z axis are updated with double nut precision ball screws, heavy duty bearings and direct drive couplers, All providing a very high localization accuracy and repeatability.
Two NEMA 23 high speed stepper motors control the X and Y axis. A powerful NEMA 34 on the Z axis.
For the NC system we use two 300W switching power supplies. One is used for the X and Y axis steppers, and the other provides power to the Nema 34 on the Z axis.
All the stepper mounts and ball screw mounts are made of high grade steel, by EDM machines, providing better precision and rigidity over other plans using aluminum.
The X, Y axis steppers are covered and protected from chips. The Z axis stepper is completely protect in the top of the Mill. Photo couplers are installed in every axis as the limit/origin check switches. They have great accuracy and provide a machine coordinate system just like real industrial machines.
The Stepper drivers provide step subdivisions up to 100, Creating the performance close to a servo system. We recommend you use the system with controller software such as MACH, KCAM4, etc.
To increase dissipation of heat from the electronics in the cabinet base, we've added a 12CM fan, So you don't need to worry about the temps in almost any workshop.
All exposed wires are covered by plastic corrugated pipes to keep everything neat and tidy.
Because all the power supplies and NC control systems are all integrated to the stand, the machine is very compact. You won’t need allot of extra room for separate control boxes or power supplies.
Just turn on the centralized power switch. The mill and all of the NC functions will start together. Connect the provided cable between the controller and your PC parallel interface and You can start enjoying the magic of CNC!
A heavy duty 3D tray for PC or tooling, with full range of motion.
The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.
*Please note that the images and specifications stated may only be used as a guide. Actual products may vary.
