FEATURES:
- All new design
- Multifunctional LCD display and touchpad controls allow MPG, axis direction, coolant, and spindle control
- The X, Y, and Z axis's are all updated with ball screws, including two screw nuts, plane bearing and couplers, providing very high localization accuracy
- The Z axis stepper motor has a direct link to the Z ball screw with a coupler. This installation has better accuracy than other conversion plans
- All stepper mounts and balls screw mounts are constructed from steel
- The X and Y axis steppers are fitted with a protective shell to protect against cutting debris. The Z axis stepper is protected by its installation in the base of the machine
- The limit/origin sensors on each axis are photo-couplers and provide a higher sensitivity and accuracy than traditional mechanical switches
- Dual 300W power supplies provide more than enough power to drive through the hardest work
- Movement subdivisions up to 100 provide performance close to servo based systems.
- The power supplies, and NC control systems are integrated to the back shell, reducing the total machine size.
- On board touch screen control, or full computer control through a parallel interface with a pc
- A powerful cooling fan keeps internal electronics from overheating
- Installed 3D bracket tray can be localized at any height, or position it can reach, and has a 360° turning radius. Good for a PC or tool storage.
SPECIFICATIONS:
Table longitudinal travel 280mm plus (owners have claimed up to 380mm achievable by repositioning limit switches)
Table Cross Travel: 160 mm
Max distance spindle to table: 380mm
Face mill capacity: 50mm
End mill capacity: 16mm
Drill capacity: 25mm
Table effective size: 550 x 160 mm
Spindle taper: R8
T-slot size: 12mm
Machine Dimensions (L x W x H): 760 mm x 720 mm x 930 mm
Driving System: Digital Stepper motor; precision ball screw
Lubrication and Cooling System: Minimal quantity lubrication, electronically adjustable dispensing
Machining Spindle: 1 kW high-frequency spindle,100 - 3300 rp rpm
Control System: Mach3
Feed Rate and Positioning Feed: X:1500m m/min Y:1500m m/min
Weight Approx.: 200KG
The following postcodes would be charged extra: IV, KW1-14, PA34, PA37-39, PH19-40, PH41 Sector 4 & PH49-50. Please contact us for further information.
*Please note that the images and specifications stated may only be used as a guide. Actual products may vary.
